Bravo Music everthing for string player
: ʼҹ:
ѤҪԡ | ʼҹ

к | ʼҹ | ѤҪԡ | | Ըա觫Թ | ԸաêԹ| ԸաԹ| ͹ | ͡Թ | ͡͡Թ | çҧԹ | ôѡԹ | ûѺͧ | Ѻ᷹ͧ˹ | Թ & | ¹Թ & | ͡Ҵͧ | úԡѧâ | Vegan Bow | Ѿͧ§ | ʵҧ | յ觷çҧ | Թçҧ | ʹբͧëԹҹ | ͹Թ&ŷҹ | ᨡŧ

    English СԹ ¡
Թ:
Share on
Թ
 

ѡ
к
ʼҹ
ѤҪԡ
Ըա觫Թ
ԸաêԹ
ԸաԹ
͹
Ѻ͡
 

   
   
   
   

 

ชมรมดับเบิ้ลเบสไทย
บริการวงดนตรีสำหรับงานวิวาห์และงานโอกาสต่างๆ
ͧѴ§ BM Recording Studio ͧѹ֡§سҾ
ͧ§;
⾧ Active PA ԡ
ŵԤ ⾧͹
ŷ8 ¡

˹ҷ 1    1 |
ش⾧ͤտSchertler Tim 600W մ
: Schertler
: SPA41A

ش⾧ͤտ Schertler Tim 600W մ

TIM кѭҳй͡ 600W (350 + 125 + 125) Сͺ«ѺٿͤտҴзѴѴдẺʫտͧ к Pocket 1 Ѻ͡Ẻ͡ҹдѺҪվա͡ẺѺûѺاФسѵԡäǺ Ե / ͤ״蹷ҡ Ѻٿҧ෤ BJT ҹ觨ԧ͡õͺʹͧ§ʷͿ࿡ͷջԷҾ дѺöѺ -7dB ֧ + 2dB дǧդẺʫտբǴẺ˹ͧ
µ͡͹е駤ʶҹóʴʴ TIM ѺѺػóͤʵԡ㹪شʹ кѧ PA ҴзѴѴջԷҾ٧Ѻʶҹ袹Ҵ硶֧Ҵҧ⹺ͧЪͧ
öͶاǹ¡ѺǹСͺͧк㨶֧âСѡҷʹ
TIM & TOM ͡Ẻ͹䫵 鹼´͹觢Ѻʵٴ㹺ҹҹѺõͧҧ ͹䫷Ѻ͡ẺͻԷҾ;प蹡÷ͧǷͧüǴҹ͡觢

Technical Specifications
Tim Sat
Frequency response 150 Hz- 20 kHz
Sensitivity @ 1W/1m 94.0 dBSPL
SPL max (calc.) 118 dBSPL
Crossover Passive - 18dB/octave
Crossover frequency 2.3 kHz
LF Transducer 6" Woofer
Ferrite magnet circuit
Voice coil diameter 38 mm
HF Transducer Compression Driver 1" Throat
Voice coil diameter 25 mm
90?x90? (H x V) horn
Power Handling (Continuous/Peak) 125W/250W
Connection Speakon Input
Nominal Impedance (Passive) 8 ?
Controls No control
Box 12 mm Plywood
Two-way
Stand mounting Top hat composed
of welded steel tube ? 36 mm, h=77 mm
Weight kg 6
Dimensions (LxDxH) 210 x 240 x 340 mm

Tim Sub
requency response 50 Hz- 150 Hz
Sensitivity @ 1W/1m 98.0 dBSPL
SPL max (calc.) 123 dBSPL
Crossover Electronic - 24dB/octave
LF Transducer 10" Woofer
Ferrite magnet circuit
Voice coil diameter 50 mm
Power Handling (Continuous/Peak) 350W/500W
Connection XLR Input (2)
XLR Output (2)
Speakon Output (2)
Impedance 10 k? @ 1 kHz for XLR line
Input sensitivity XLR 0 dBu (0.775 Vrms)
in balance mode
Controls Volume, Ground Lift Switch, mono/stereo
Box 18 mm Plywood
bass reflex
Stand Mounting Top hat composed
of welded steel tube ? 36 mm, h=77 mm
Weight Kg 18
Dimensions (LxDxH) 320 x 510 x 490 mm
Ҥ : 62,000
ش⾧ͤտ Schertler Tim 600W
: Schertler
: SPA41W

ش⾧ͤտ Schertler Tim 600W

TIM кѭҳй͡ 600W (350 + 125 + 125) Сͺ«ѺٿͤտҴзѴѴдẺʫտͧ к Pocket 1 Ѻ͡Ẻ͡ҹдѺҪվա͡ẺѺûѺاФسѵԡäǺ Ե / ͤ״蹷ҡ Ѻٿҧ෤ BJT ҹ觨ԧ͡õͺʹͧ§ʷͿ࿡ͷջԷҾ дѺöѺ -7dB ֧ + 2dB дǧդẺʫտբǴẺ˹ͧ
µ͡͹е駤ʶҹóʴʴ TIM ѺѺػóͤʵԡ㹪شʹ кѧ PA ҴзѴѴջԷҾ٧Ѻʶҹ袹Ҵ硶֧Ҵҧ⹺ͧЪͧ
öͶاǹ¡ѺǹСͺͧк㨶֧âСѡҷʹ
TIM & TOM ͡Ẻ͹䫵 鹼´͹觢Ѻʵٴ㹺ҹҹѺõͧҧ ͹䫷Ѻ͡ẺͻԷҾ;प蹡÷ͧǷͧüǴҹ͡觢

Technical Specifications
Tim Sat
Frequency response 150 Hz- 20 kHz
Sensitivity @ 1W/1m 94.0 dBSPL
SPL max (calc.) 118 dBSPL
Crossover Passive - 18dB/octave
Crossover frequency 2.3 kHz
LF Transducer 6" Woofer
Ferrite magnet circuit
Voice coil diameter 38 mm
HF Transducer Compression Driver 1" Throat
Voice coil diameter 25 mm
90?x90? (H x V) horn
Power Handling (Continuous/Peak) 125W/250W
Connection Speakon Input
Nominal Impedance (Passive) 8 ?
Controls No control
Box 12 mm Plywood
Two-way
Stand mounting Top hat composed
of welded steel tube ? 36 mm, h=77 mm
Weight kg 6
Dimensions (LxDxH) 210 x 240 x 340 mm

Tim Sub
requency response 50 Hz- 150 Hz
Sensitivity @ 1W/1m 98.0 dBSPL
SPL max (calc.) 123 dBSPL
Crossover Electronic - 24dB/octave
LF Transducer 10" Woofer
Ferrite magnet circuit
Voice coil diameter 50 mm
Power Handling (Continuous/Peak) 350W/500W
Connection XLR Input (2)
XLR Output (2)
Speakon Output (2)
Impedance 10 k? @ 1 kHz for XLR line
Input sensitivity XLR 0 dBu (0.775 Vrms)
in balance mode
Controls Volume, Ground Lift Switch, mono/stereo
Box 18 mm Plywood
bass reflex
Stand Mounting Top hat composed
of welded steel tube ? 36 mm, h=77 mm
Weight Kg 18
Dimensions (LxDxH) 320 x 510 x 490 mm
Ҥ : 64,000
ش⾧ͤտ Schertler Tom 1000 ѵ մ
: Schertler
: SPA42A

ش⾧ͤտ Schertler Tom 1000 ѵ մ

TOM к§㹵ѭҳй͡ 1000 ѵ (500 + 250 + 250) Сͺ Active Subwoofer ҴзѴѴ Sat Ẻ Passive ͧ к Pocket Two Ѻ͡Ẻ͡ҹдѺҪվա͡ẺѺûѺاФسѵԡäǺ Ե / ͤ״蹷ҡ Ѻٿҧ෤ BJT ҹ觨ԧ͡õͺʹͧ§ʷͿ࿡ͷջԷҾ дѺöѺ -7dB ֧ + 2dB Sat еǨդẺ Passive բǴẺ˹ͧ
TOM ѺþѲҢ繾ѺʶҹСҧ駢Ҵҧ֧Ҵ˭ͧçѧѺͻप§Ͷҡ» µ͡͹еԴкѧջԷҾ٧ѺʶҹóʴʴҧѺâѭҳ§

öͶاǹ¡ѺǹСͺͧк㨶֧âСѡҷʹ

TIM & TOM ͡Ẻ ͹䫵 鹼´͹觢Ѻʵٴ㹺ҹҹѺõͧҧ ͹䫷Ѻ͡ẺͻԷҾ ;प蹡þҷͧüǴҹ͡觢

Technical Specifications

⾧ Sat §ҧ-٧
õͺʹͧ : 150 Hz- 20 kHz
§ : @ 1W/1m 96.0 dBSPL
SPL max (calc.) : 123 dBSPL
Crossover : Passive - 18dB/octave
Crossover frequency : 2.2 kHz
LF Transducer : Ҵ͡⾧ Woofer 8
ǧõ
«좹Ҵ 65
HF Transducer : ǺúպѴ 1 Ӥ
«좹Ҵ 25 . 90ͧ x 90ͧ (H x V) horn
Power Handling (Continuous/Peak) : 200W/350W
õ : Speakon Input
Nominal Impedance (Passive) : 4
ջǺ
˹çҧ : 12. ӨҡѴسҾ٧ 2 ҧ
ҵẺ : Top hat composed of welded steel tube Diameter 36 mm, h=77 mm
˹ѡ : 7 š
Ҵҧ 240 ֡ 240 ٧ 380 .

⾧Ѻ
õͺʹͧ 45 Hz- 150 Hz
§ @ 1W/1m 99.0 dBSPL
SPL max (calc.) 126 dBSPL
Crossover Electronic - 24dB/octave
LF Transducer : ͡⾧ Woofer 12
ǧõ
鹼ٹҧ§ 65 mm
Power Handling (Continuous/Peak) : 500ѵ/800ѵ
: XLR Input (2)
XLR Output (2)
Speakon Output (2)
ҹҹ : 10 @ 1 kHz for XLR line
Input sensitivity : XLR 0 dBu (0.775 Vrms)
in balance mode
Controls Volume, Ground Lift Switch, mono/stereo
˹ҵǵ :18 . ӨҡѴسҾ٧ͺʹͧ §з͹
˹ѡ : 24 š
Ҵҧ 360 ֡ 495 ٧ 490 mm
Ҥ : 72,000
ش⾧ͤտ Schertler Tom 1000 ѵ
: Schertler
: SPA42W

ش⾧ͤտ Schertler Tom 1000 ѵ

TOM к§㹵ѭҳй͡ 1000 ѵ (500 + 250 + 250) Сͺ Active Subwoofer ҴзѴѴ Sat Ẻ Passive ͧ к Pocket Two Ѻ͡Ẻ͡ҹдѺҪվա͡ẺѺûѺاФسѵԡäǺ Ե / ͤ״蹷ҡ Ѻٿҧ෤ BJT ҹ觨ԧ͡õͺʹͧ§ʷͿ࿡ͷջԷҾ дѺöѺ -7dB ֧ + 2dB Sat еǨդẺ Passive բǴẺ˹ͧ
TOM ѺþѲҢ繾ѺʶҹСҧ駢Ҵҧ֧Ҵ˭ͧçѧѺͻप§Ͷҡ» µ͡͹еԴкѧջԷҾ٧ѺʶҹóʴʴҧѺâѭҳ§

öͶاǹ¡ѺǹСͺͧк㨶֧âСѡҷʹ

TIM & TOM ͡Ẻ ͹䫵 鹼´͹觢Ѻʵٴ㹺ҹҹѺõͧҧ ͹䫷Ѻ͡ẺͻԷҾ ;प蹡þҷͧüǴҹ͡觢

Technical Specifications

⾧ Sat §ҧ-٧
õͺʹͧ : 150 Hz- 20 kHz
§ : @ 1W/1m 96.0 dBSPL
SPL max (calc.) : 123 dBSPL
Crossover : Passive - 18dB/octave
Crossover frequency : 2.2 kHz
LF Transducer : Ҵ͡⾧ Woofer 8
ǧõ
«좹Ҵ 65
HF Transducer : ǺúպѴ 1 Ӥ
«좹Ҵ 25 . 90ͧ x 90ͧ (H x V) horn
Power Handling (Continuous/Peak) : 200W/350W
õ : Speakon Input
Nominal Impedance (Passive) : 4
ջǺ
˹çҧ : 12. ӨҡѴسҾ٧ 2 ҧ
ҵẺ : Top hat composed of welded steel tube Diameter 36 mm, h=77 mm
˹ѡ : 7 š
Ҵҧ 240 ֡ 240 ٧ 380 .

⾧Ѻ
õͺʹͧ 45 Hz- 150 Hz
§ @ 1W/1m 99.0 dBSPL
SPL max (calc.) 126 dBSPL
Crossover Electronic - 24dB/octave
LF Transducer : ͡⾧ Woofer 12
ǧõ
鹼ٹҧ§ 65 mm
Power Handling (Continuous/Peak) : 500ѵ/800ѵ
: XLR Input (2)
XLR Output (2)
Speakon Output (2)
ҹҹ : 10 @ 1 kHz for XLR line
Input sensitivity : XLR 0 dBu (0.775 Vrms)
in balance mode
Controls Volume, Ground Lift Switch, mono/stereo
˹ҵǵ :18 . ӨҡѴسҾ٧ͺʹͧ §з͹
˹ѡ : 24 š
Ҵҧ 360 ֡ 495 ٧ 490 mm
Ҥ : 74,000


Usually ship in 24-48 hours
ش⾧ͤտ Schertler ELYPS 1000 ѵ ANTHRACITE
: Schertler
: SPAE1000A

ش⾧ͤտ Schertler ELYPS 1000 ѵ ANTHRACITE
ELYPS 1000 is a 1000W (500+250+250) analog amplification system that consists of a compact active subwoofer AB12 and two passive satellites PT8. The system has been engineered for professional use. The subwoofer is constructed using BJT technology, incorporating a linear power supply for excellent bass response and efficient stereo effect. Sub levels can be adjusted from -7dB to +2dB. Each satellite contains a passive crossover featuring a custom coil.

Easy to transport and set up in live performance situations, ELYPS 1000 is ideal for use with acoustic instruments and in jazz or DJ sets. It's a highly-efficient compact PA system for use in small to medium sized venues such as piano bars, gyms, conference rooms, ballroom and theaters.

The Elyps system is available in a choice of wood or anthracite finishes.

PT8
Weight : 7 kg (each)
Dimensions (LxDxH) : 24 x 24 x 38 cm (each)
Frequency Response (+/-3dB) : 150 to 20 kHz
Sensitivity (1W/1m) 1 kHz : n.a.
SPL Max : 118 dB
Speakers : 1 inch driver + 8 inch woofer (each)
Crossover : Passive - 18 dB/octave
Crossover freq. Cut : n.a.
Box constructionr : 12 mm birch BB laminated
Input connector : Speakon power input
Input sensitivity : n.a.
Input impedance : passive 4 Ohm
Output connector : n.a.
Controls : n.a.
Power : 250 W Pure analog power (each)
Stand mounting : Flange mount 36 mm, h=102 mm on bottom
Available versions : Light wood and anthracit

AB12
Weight : 24 kg
Dimensions (LxDxH) : 36 x 49.5 x 49 cm
Frequency Response (+/-3dB) : 45 to 150 Hz
Sensitivity (1W/1m) 1 kHz : n.a.
SPL Max : 121 dB
Speakers : 12 inch woofer
Crossover : Active - 24 dB/octave
Crossover freq. Cut : 150 Hz
Box constructionr : 18 mm birch BB laminated
Input connector : XLR
Input sensitivity : 0 dBu
Input impedance : 10 k Ohm
Output connector : Speakon power output, XLR balanced parallel out
Controls : Volume + ground lift + mono/stereo
Power : 500 W Pure analog power
Stand mounting : Flange mount 36 mm, h=102 mm on top
Available versions : Light wood and anthracite
Ҥ : 110,000
ش⾧ͤտ Schertler ELYPS 1000 ѵ Wood
: Schertler
: SPAE1000W

ش⾧ͤտ Schertler ELYPS 1000 ѵ Wood
ELYPS 1000 is a 1000W (500+250+250) analog amplification system that consists of a compact active subwoofer AB12 and two passive satellites PT8. The system has been engineered for professional use. The subwoofer is constructed using BJT technology, incorporating a linear power supply for excellent bass response and efficient stereo effect. Sub levels can be adjusted from -7dB to +2dB. Each satellite contains a passive crossover featuring a custom coil.

Easy to transport and set up in live performance situations, ELYPS 1000 is ideal for use with acoustic instruments and in jazz or DJ sets. It's a highly-efficient compact PA system for use in small to medium sized venues such as piano bars, gyms, conference rooms, ballroom and theaters.

The Elyps system is available in a choice of wood or anthracite finishes.

PT8
Weight : 7 kg (each)
Dimensions (LxDxH) : 24 x 24 x 38 cm (each)
Frequency Response (+/-3dB) : 150 to 20 kHz
Sensitivity (1W/1m) 1 kHz : n.a.
SPL Max : 118 dB
Speakers : 1 inch driver + 8 inch woofer (each)
Crossover : Passive - 18 dB/octave
Crossover freq. Cut : n.a.
Box constructionr : 12 mm birch BB laminated
Input connector : Speakon power input
Input sensitivity : n.a.
Input impedance : passive 4 Ohm
Output connector : n.a.
Controls : n.a.
Power : 250 W Pure analog power (each)
Stand mounting : Flange mount 36 mm, h=102 mm on bottom
Available versions : Light wood and anthracit

AB12
Weight : 24 kg
Dimensions (LxDxH) : 36 x 49.5 x 49 cm
Frequency Response (+/-3dB) : 45 to 150 Hz
Sensitivity (1W/1m) 1 kHz : n.a.
SPL Max : 121 dB
Speakers : 12 inch woofer
Crossover : Active - 24 dB/octave
Crossover freq. Cut : 150 Hz
Box constructionr : 18 mm birch BB laminated
Input connector : XLR
Input sensitivity : 0 dBu
Input impedance : 10 k Ohm
Output connector : Speakon power output, XLR balanced parallel out
Controls : Volume + ground lift + mono/stereo
Power : 500 W Pure analog power
Stand mounting : Flange mount 36 mm, h=102 mm on top
Available versions : Light wood and anthracite
Ҥ : 112,000
ش⾧ͤտ Schertler ELYPS 600 ѵ ANTHRACITE
: Schertler
: SPAE600A

ش⾧ͤտ Schertler ELYPS 600 ѵ ANTHRACITE
ELYPS 600 is a 600W (350+125+125) analog amplification system and that consists of a compact active subwoofer AB10 and two passive satellites PT6. It has been engineered for professional use.

The subwoofer is constructed using BJT technology, incorporating a linear power supply for excellent bass response and efficient stereo effect. Sub levels can be adjusted from -7dB to +2dB. Each satellite contains a passive crossover featuring a custom coil.

Easy to transport and set up in live performance situations, ELYPS 600 is ideal for use with acoustic instruments and in jazz or DJ sets. It's a highly-efficient compact PA system for use in small to medium sized venues such as piano bars, gyms, conference rooms, ballroom and theaters.

ELYPS is available in a choice of wood or anthracite finishes.

PT6
Weight : 6 kg (each)
Dimensions (LxDxH) : 21 x 24 x 34 cm (each)
Frequency Response (+/-3dB) : 150 to 20 kHz
Sensitivity (1W/1m) 1 kHz : n.a.
SPL Max : 113 dB
Speakers : 1 inch driver + 6 inch woofer (each)
Crossover : Passive - 18 dB/octave
Crossover freq. Cut : n.a.
Box constructionr : 12 mm birch BB laminated
Input connector : Speakon power input
Input sensitivity : n.a.
Input impedance : passive 8 Ohm
Output connector : n.a.
Controls : n.a.
Power : 150 W Pure analog power (each)
Stand mounting : Flange mount 36 mm, h=102 mm on bottom
Available versions : Light wood and anthracite

AB10
Weight : 18 kg
Dimensions (LxDxH) : 32 x 51 x 49 cm
Frequency Response (+/-3dB) : 50 to 150 Hz
Sensitivity (1W/1m)1 kHz: n.a.
SPL Max : 117 dB
Speakers : 10 inch woofer
Crossover : Active - 24 dB/octave
Crossover freq. Cut : 150 Hz
Box constructionr : 18 mm birch BB laminated
Input connector : XLR
Input sensitivity : 0 dBu
Input impedance : 10 k Ohm
Output connector : Speakon power output, XLR balanced parallel out
Controls : Volume + ground lift + mono/stereo
Power : 300 W Pure analog power
Stand mounting : Flange mount 36 mm, h=102 mm on top
Available versions : Light wood and anthracite
Ҥ : 86,000
ش⾧ͤտ Schertler ELYPS 600 ѵ Wood
: Schertler
: SPAE600W

ش⾧ͤտ Schertler ELYPS 600 ѵ Wood
ELYPS 600 is a 600W (350+125+125) analog amplification system and that consists of a compact active subwoofer AB10 and two passive satellites PT6. It has been engineered for professional use.

The subwoofer is constructed using BJT technology, incorporating a linear power supply for excellent bass response and efficient stereo effect. Sub levels can be adjusted from -7dB to +2dB. Each satellite contains a passive crossover featuring a custom coil.

Easy to transport and set up in live performance situations, ELYPS 600 is ideal for use with acoustic instruments and in jazz or DJ sets. It's a highly-efficient compact PA system for use in small to medium sized venues such as piano bars, gyms, conference rooms, ballroom and theaters.

ELYPS is available in a choice of wood or anthracite finishes.

PT6
Weight : 6 kg (each)
Dimensions (LxDxH) : 21 x 24 x 34 cm (each)
Frequency Response (+/-3dB) : 150 to 20 kHz
Sensitivity (1W/1m) 1 kHz : n.a.
SPL Max : 113 dB
Speakers : 1 inch driver + 6 inch woofer (each)
Crossover : Passive - 18 dB/octave
Crossover freq. Cut : n.a.
Box constructionr : 12 mm birch BB laminated
Input connector : Speakon power input
Input sensitivity : n.a.
Input impedance : passive 8 Ohm
Output connector : n.a.
Controls : n.a.
Power : 150 W Pure analog power (each)
Stand mounting : Flange mount 36 mm, h=102 mm on bottom
Available versions : Light wood and anthracite

AB10
Weight : 18 kg
Dimensions (LxDxH) : 32 x 51 x 49 cm
Frequency Response (+/-3dB) : 50 to 150 Hz
Sensitivity (1W/1m)1 kHz: n.a.
SPL Max : 117 dB
Speakers : 10 inch woofer
Crossover : Active - 24 dB/octave
Crossover freq. Cut : 150 Hz
Box constructionr : 18 mm birch BB laminated
Input connector : XLR
Input sensitivity : 0 dBu
Input impedance : 10 k Ohm
Output connector : Speakon power output, XLR balanced parallel out
Controls : Volume + ground lift + mono/stereo
Power : 300 W Pure analog power
Stand mounting : Flange mount 36 mm, h=102 mm on top
Available versions : Light wood and anthracite
Ҥ : 88,000
˹ҷ 1    1 |