ชุดไวร์เลสสำหรับไวโอลิน/กีต้าร์/เบส Shure SLX14E-R13

ชุดไวร์เลสสำหรับไวโอลิน/กีต้าร์/เบส Shure SLX14E-R13 Instrument Wireless System SLX1 Bodypack Transmitter The reliable SLX1 wireless bodypack transmitter is designed to hold up to the most adverse conditions. SLX1 can be used in a variety of SLX Wireless systems, including Lavalier, Headworn, Guitar/Bass, Instrument, and Combo. Automatic Transmitter Setup Backlit LCD with timeout feature Frequency and power lockout 3-segment battery fuel gauge 2 AA batteries (included) provide 8 hours continuous use 470 - 782 MHz operating range Dimensions: 108 mm H x 64 mm W x 19 mm D (4.25" x 2.5" x 0.75") SLX Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology. SPECIFICATIONS Audio Input Level -10 dBV maximum at mic gain position +10 dBV maximum at 0 dB gain position +20 dBV maximum at -10 dB gain position Gain Adjustment Range 30dB Input Impedance 1 megohm RF Transmitter Output 30 mW maximum (dependent on applicable country regulations) Dimensions 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.) Weight 81 grams (3 oz.) without batteries Housing Molded ABS case Power Requirements 2 AA size alkaline or rechargeable batteries Battery Life >8 hours (alkaline) SLX4 Diversity Receiver Available Options SLX4 Diversity Receiver SLX4L Diversity Receiver w/ Logic Output The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. For use with SLX Wireless. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box. Model SLX4L is available with logic output for use with software echo cancellation and remote battery life monitoring. Logic-enabled transmitters include MX690 and MX890. FEATURES SLX Wireless Systems feature the patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology. Automatic Frequency Selection Automatic Transmitter Setup 960 Selectable frequencies across 24 MHz bandwidth Detachable 1/4 wave antennas Microprocessor-controlled diversity RF presence LED 5-segment audio meter Multi-function, backlit LCD Low battery indicator Frequency and power lockout Rugged metal chassis Volume control on rear of unit 1/2 rack design Furnished rack hardware Non-slip bumpers for use out of rack XLR and 1/4" outputs Optional logic functionality for software echo cancellation and remote battery life monitoring (SLX4L only) SPECIFICATIONS Audio Output Level (ref. +/- 38 kHz deviation with 1 kHz tone) XLR connector (into 600 Ohm load): -13 dBV 1/4 inch connector (into 3000 Ohm load): -2 dBV Output Impedance XLR connector: 200 Ohms 1/4 inch connector: 1 kilohm XLR output Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio Pin 3: No Audio Sensitivity -105 dBm for 12 dB SINAD, typical Image Rejection >70 dB, typical Power Requirements 12 to 18 Vdc at 150 mA, supplied by external power supply Dimensions 42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.) Weight 816 g (1 lb. 13 oz.) Housing Galvanized steel